How Do I Know If My Keyboard is Broken? [Tips]


If you are having trouble with your keyboard, you may want to take it in for repair. You can check the keys and the area around the keyboard. If the issue is caused by the keycaps or switch, you can replace the part. You can also try to fix the problem by reinstalling the driver. However, if the problem persists, you may want to bring it in for professional repairs.

Replace the switch

If you need to replace the switch on a broken keyboard, there are some simple steps you can follow. The key is to make sure you are using the right tools.

To remove the switch from a broken keyboard, you will need a small flathead screwdriver. This will help you pry up the switch plate without damaging the PCB.

Once you have gotten the switch out of the PCB, you can take out the casing. You can also separate the casing by pulling up flaps on the side of the switch.

You can also replace the switch on a broken keyboard with a soldering iron. This is the cheapest and easiest way to do it. It is best to do this outdoors, since you will be breathing the fumes from the solder.

You may also want to check your keyboard for a broken pin. Bent pins can be straightened with pliers.

You can even use epoxy to fix a broken key. However, you should be careful when putting the keycap back on. A keycap might fall off along with the switch, so don’t overdo it.

You can also pull the switch out of the PCB with a soldering iron or a switch puller. Some switches are easier to pull out than others.

For the same reason, you should be careful not to pull too hard when lifting a switch out of the socket. Otherwise, you may break it!

For the best results, you should be able to replace the switch on a broken keyboard without causing any damage. If you are new to electronics, you may want to look for tutorials on YouTube.

Clean the area around the keyboard

If you find that you are unable to type on your keyboard, you may want to clean the area around it. Debris from your keyboard can interfere with the keyboard circuitry and obstruct the keys. It can also make the keys sticky.

There are several different ways you can clean your keyboard. In general, the most effective way is to use a can of compressed air. You can buy a can at your local hardware store or drug store. Once you’ve got it, blow it on your keyboard, starting at the top, and moving your way down.

For a more thorough cleaning, you can also clean your keyboard using a lint-free cloth. This will remove the last of the dust from the keyboard. Be careful not to add any new debris, though.

Another option is to use liquid dish soap. You can mix it with a bit of water and wipe the keys with the liquid. Isopropyl alcohol is another good cleaner.

Finally, you can also try using an old T-shirt or paper towels. A lint-free cloth is the best choice in an emergency, though. The lint-free cloth will not allow the moisture to seep into the keyboard.

To clean the keys, you can use isopropyl alcohol, a diluted liquid soap, or even denture tablets. The best thing to remember is to not use the alcohol directly on the key.

After you’ve cleaned your keys, test the keyboard to ensure that it is working correctly. If you still can’t type on it, it’s likely that the membrane on your keyboard is faulty. Your options may include replacing the keyboard or connecting your laptop to a different port.

Check the keycaps

If you’ve got a keyboard that has stopped working, you may need to check the keycaps. Keyboards tend to get dusty and rusty over time. This can affect the performance of your computer. To fix this, you’ll need to remove your keys and clean them.

You should also take a look at the switches. If any of the keys are unresponsive, you may want to check for a hardware or software issue. If the keys are stuck on some debris or not able to be moved, you might need to replace the keycaps.

You’ll need to use contact cleaner designed for this purpose. Once you’ve cleaned the keyboard, plug in the keycaps. Do this carefully, as any bent metal pins could cause the switch to malfunction.

If the keycaps are still in good shape, you can place them back on the keyboard. Just be sure to press them into place gently and keep checking for bounce or pressure. Ideally, you should be able to hear the keycap snap into place.

For a mechanical keyboard, you’ll need to take care to avoid bending the metal pins. A broken key cap can damage the connectors or the PCB.

To replace a keycap, you’ll need to use a small flathead screwdriver. Then, press the keycap’s edges inward toward the right. When it’s in place, you can test it out by clicking it.

Membrane keyboards have a keycap that’s made with elongated plastic injection. This helps to ensure that it makes contact with the rubber nub. However, it’s possible for the rubber nub to break.

You can fix a broken key by using super glue. You can also use a keycap puller to remove it.

Reinstall the driver

If you have a keyboard that is not working, you may want to try reinstalling the driver. It’s an easy and quick process, and there are a few ways to do it.

One method is to use the Device Manager. This is a menu that’s located in the Start menu, the taskbar, or the Start screen.

The Device Manager displays all the devices that are installed on your PC. You can right-click on any device, such as your keyboard, and select Uninstall to remove the device. After the uninstallation is complete, you’ll have to restart your computer.

Alternatively, you can download a free tool, such as Bit Driver Updater. This tool will scan your PC for outdated drivers, and it will install the most recent driver automatically. It will improve your PC’s speed and performance, and it will make it run smoother.

Another option is to use the built-in Hardware and Devices troubleshooter. In most cases, this tool will fix your keyboard problem.

You can also restart your PC if it is stuck. Restarting your computer will reset any issues, and it will also bring it back to a fresh state. But this can take a few minutes, so be prepared for it.

Lastly, you can restart your computer between uninstallation processes. Do this to ensure that the keyboard is not damaged.

In some situations, you can also use the Automatic Repair function. However, this will only be effective if you have a computer with a clean operating system. For example, if your computer has an upgrade, your keyboard will probably have to be reinstalled.

You can find a downloadable driver for your keyboard on the manufacturer’s website. The driver will be stored in a folder called “Driver Backup” on your computer.

Take it to a professional

If you are experiencing a problem with your laptop or desktop computer’s keyboard, you may want to take it to a professional. Often, there are hardware and software issues that can lead to a keyboard’s malfunction.

To begin, take a look at the software and hardware of your computer. In some cases, it is just a matter of adjusting settings or reinstalling the drivers. For other cases, you may have to call in a professional.

Another possible cause is a physical connection. If you have an external keyboard or Bluetooth keyboard, it may be causing problems. It’s important to check that the cable is in place and that the port is working. You can try connecting the keyboard to a different port to see if that fixes the problem.

Alternatively, you can try cleaning your keyboard. Depending on the type of keyboard you have, you may be able to remove the keys. This will allow you to get a good look at the inner workings of the keyboard.

However, if your keyboard is still not working, it’s probably time for a replacement. Before you buy a new one, you can do a quick test on your current one. Some keyboards can be taken apart easily, so you don’t have to rely on a repair person.

Generally, you should make sure that the keycaps are in their right order. This is because the keycaps may be stuck on debris, and you need to move them to the correct position.

Similarly, you can clean the membrane. There are several ways to do this, including using a vacuum or a paper towel. Using compressed air to blow off the residue can also help.

How much does a new keyboard cost?

A new keyboard can cost anywhere from $10 to $200 depending on the type and features. A basic keyboard for a computer usually costs around $10-$20 and is perfect for everyday use. These keyboards are typically made of plastic and may have a few extra features such as extra programmable keys or a special media control panel. If you’re looking for a gaming keyboard, then you’ll need to spend a bit more money. Gaming keyboards are usually made of metal or aluminum and feature extra buttons, programmable keys, and an ergonomic design. These keyboards can cost anywhere from $50-$200 depending on the features and brand.

If you’re looking for a keyboard to use with your laptop, then you’ll need to buy a separate keyboard. Laptop keyboards are usually sold separately from the laptop itself and can cost anywhere from $20-$100. These keyboards are usually designed to be slim and lightweight, making them perfect for traveling. They also usually come with a few extra features such as backlighting and programmable keys.

Finally, if you’re looking for a keyboard for music production or recording, then you’ll need to spend a bit more money. Midi keyboards usually start around $100 but can go up to $500 depending on the brand and features. Midi keyboards usually come with extra features such as velocity-sensitive keys, aftertouch, and programmable keys. They also usually come with a variety of outputs such as USB, MIDI, and audio.

Overall, the cost of a new keyboard varies greatly depending on the type and features you need. A basic keyboard for everyday use can cost around $10-$20, while a gaming keyboard can cost up to $200. Laptop keyboards usually cost around $20-$100, and midi keyboards can range from $100-$500. No matter what type of keyboard you’re looking for, there’s sure to be one out there that will suit your needs and budget.

By Brandon S. Lee

Hi, My name Brandon S.Lee and I am a professional Gamer, I also worked with the keyboard making company called Logitech. I was the quality check manager of the Logitech keyboard department. Here we have a team of people who researched on the keyboards, talked with keyboard users and analyzes the user reviews and then write the product reviews.

Related Posts